Table of Contents
Advertisement
Quick Links
T0211 TRANSMITTER
Programmable transmitter of temperature, relative humidity
and other derived humidity values
with 0 to 10 V outputs
Instruction Manual
© Copyright: COMET SYSTEM, s.r.o.
It is prohibited to copy and make any changes in this manual, without explicit agreement
of company COMET SYSTEM, Ltd. All rights reserved.
COMET SYSTEM, Ltd. makes constant development and improvement of their products.
Manufacturer reserves the right to make technical changes to the device without previous notice.
Misprints reserved.
Advertisement
Table of Contents
Related Manuals for Comet System T0211
Summary of Contents for Comet System T0211
- Page 1 It is prohibited to copy and make any changes in this manual, without explicit agreement of company COMET SYSTEM, Ltd. All rights reserved. COMET SYSTEM, Ltd. makes constant development and improvement of their products. Manufacturer reserves the right to make technical changes to the device without previous notice.
-
Page 2: Device Setting From The Manufacturer
Instrument is equipped with an external humidity and temperature probe on a cable. The probe of T0211 transmitter is a non-removable instrument part. Measured and computed values are displayed on dual line LCD display. - Page 3 0.5 m, otherwise undesirable induction of interference signals can appear. Outside diameter of the cable for T0211(P) device must be from 3,5 to 8 mm (e.g. SYKFY), for device T0211L with respect to the female connector. Do NOT connect shielding at connector side.
-
Page 4: Typical Application Wiring
Uac = 24 Vac Udc = 15 to 30 Vdc maximum load current of each voltage output is 0.5 mA COMET SYSTEM, s.r.o., Bezrucova 2901 Specifications are subject to change without notice. IE-SNC-T0211-09 756 61 Roznov pod Radhostem, Czech republic... -
Page 5: Readings On Lcd Display
Reading next to this symbol is calculated specific humidity or mixing ratio (depends on device setting) or error state of value. If specific enthalpy is selected, there is shown only value (number) without corresponding unit! COMET SYSTEM, s.r.o., Bezrucova 2901 Specifications are subject to change without notice. IE-SNC-T0211-09... -
Page 6: Error States Of The Device
• Computed value – calculation of computed value is not possible (error during measurement of temperature or relative humidity). COMET SYSTEM, s.r.o., Bezrucova 2901 Specifications are subject to change without notice. IE-SNC-T0211-09 756 61 Roznov pod Radhostem, Czech republic... -
Page 7: Technical Parameters
Accuracy: ± 2.5 %RH from 5 to 95 %RH at 23 °C (73,4 °F) Measuring temperature and humidity range is limited in accordance with the graph below! COMET SYSTEM, s.r.o., Bezrucova 2901 Specifications are subject to change without notice. IE-SNC-T0211-09... - Page 8 T < 25 °C (104 °F), for more details Accuracy: see graph below Range: 0 to 400 g/m COMET SYSTEM, s.r.o., Bezrucova 2901 Specifications are subject to change without notice. IE-SNC-T0211-09 756 61 Roznov pod Radhostem, Czech republic...
- Page 9 Response time with stainless steel mesh sensor cover (F5200B) and bronze sensor cover (F0000 - selectable option), air flow approximately 1 m/s: temperature: T0211 t90 < 6 min (temperature step 20 °C (36 °F)) T0211P t90 < 16 min (temperature step 20 °C (36 °F)) relative humidity: t90 <...
-
Page 10: End Of Operation
Dimensions: see dimensional drawings Weight: approximately T0211(L)/1m probe 210 g, T0211(L)/2 m probe 250 g, T0211(L)/4m probe 330 g T0211P/1m probe 260 g, T0211P/2 m probe 300 g, T0211P/4m probe 380 g Material of the case: ASA Material of the probe T0211P: duralumin with the black eloxal surface finish... - Page 11 Sample flow rate: 0.1 to 3 l/min Operating pressure: up to 25 bar Weight: 580 g Note: Screw-coupling not included COMET SYSTEM, s.r.o., Bezrucova 2901 Specifications are subject to change without notice. IE-SNC-T0211-09 756 61 Roznov pod Radhostem, Czech republic...
Need help?
Do you have a question about the T0211 and is the answer not in the manual?
Questions and answers