Table of Contents
Advertisement
Quick Links
T0210 TRANSMITTER
Programmable transmitter of temperature, relative humidity
and other derived humidity values
with 0 to 10 V outputs
Instruction Manual
© Copyright: COMET SYSTEM, s.r.o.
It is prohibited to copy and make any changes in this manual, without explicit agreement
of company COMET SYSTEM, Ltd. All rights reserved.
COMET SYSTEM, Ltd. makes constant development and improvement of their products.
Manufacturer reserves the right to make technical changes to the device without previous notice.
Misprints reserved.
Advertisement
Table of Contents
Related Manuals for Comet System T0210
Summary of Contents for Comet System T0210
- Page 1 It is prohibited to copy and make any changes in this manual, without explicit agreement of company COMET SYSTEM, Ltd. All rights reserved. COMET SYSTEM, Ltd. makes constant development and improvement of their products. Manufacturer reserves the right to make technical changes to the device without previous notice.
- Page 2 Similar effect can occur under water aerosol conditions. Don’t connect transmitter while power supply voltage is on. Interconnection terminals of T0210 are accessible after unscrewing four screws and removing the lid. Lace the cable through a gland at the case wall.
- Page 3 0.5 m, otherwise undesirable induction of interference signals can appear. Outside diameter of the cable for T0210 device must be from 3,5 to 8 mm (e.g. SYKFY), for device T0210L with respect to the female connector. Do NOT connect shielding at connector side.
- Page 4 Notice: during info mode no measurement and no output voltage generation proceed. The transmitter stays at info mode 15 s, and then automatically goes back to measuring cycle. COMET SYSTEM, s.r.o., Bezrucova 2901 Specifications are subject to change without notice. IE-SNC-T0210-09...
- Page 5 -60 to +80 °C Range: Absolute humidity ±3g/m at ambient temperature T < 40°C Accuracy: Range: 0 to 400 g/m COMET SYSTEM, s.r.o., Bezrucova 2901 Specifications are subject to change without notice. IE-SNC-T0210-09 756 61 Roznov pod Radhostem, Czech republic...
- Page 6 Default value preset by manufacturer is 1013hPa and can be changed by user’s software. This maximum is reached under conditions about 70°C/100%RH or 80°C/70%RH COMET SYSTEM, s.r.o., Bezrucova 2901 Specifications are subject to change without notice. IE-SNC-T0210-09...
- Page 7 • Computed value – calculation of computed value is not possible (error during measurement of temperature or relative humidity). COMET SYSTEM, s.r.o., Bezrucova 2901 Specifications are subject to change without notice. IE-SNC-T0210-09 756 61 Roznov pod Radhostem, Czech republic...
- Page 8 Device itself (after its life) is necessary to liquidate ecologically! Technical support and service Technical support and service is provided by distributor. For contact see warranty certificate. Appendix A COMET SYSTEM, s.r.o., Bezrucova 2901 Specifications are subject to change without notice. IE-SNC-T0210-09 756 61 Roznov pod Radhostem, Czech republic...
Need help?
Do you have a question about the T0210 and is the answer not in the manual?
Questions and answers