Safety Notices - ABB PCS100 AVC-40-1B Accessories Assembly Instructions

Active voltage conditioner roof kit

Table of Contents

PCS100 AVC-40-1B Roof Kit Assembly Instruction

—

Safety Notices

This document contains important information regarding the installation of the ABB PCS100 AVC-40-1B roof kit.

This assembly instructions provide technical guidance for installation engineers. The following safety

instructions are to be observed.

DANGER

This checklist does not provide sufficient information for safe service of the PCS100 AVC-40-

1B. For such service information refer to appropriate manual.

CAUTION – Trained Commissioning Engineers

All operations on the PCS100 AVC-40-1B must only be carried out by a trained commissioning

engineer familiar with the contents of this checklist. Hazardous conditions could arise from

incorrect adjustment.

DANGER – Stored Charge

Stored charge is present after the device is switched off.

DANGER – Protective Covers

Normal operation of this product requires any protective covers in place and doors secured

closed.

DANGER – Personal Protection Equipment

Ensure safety glasses are worn while working if any part of the unit could be energized.

Ensure appropriate safety footwear is worn if inserting or removing modules or

components from the product.

Table of Contents