Yamaha YXZ1000R 2020 Service Manual page 13

[Coolant temperature display]
1. Coolant temperature display
When the coolant temperature is in the normal
operating range, the temperature will be dis-
played. When the coolant temperature is low,
"LO" will be displayed. When the coolant tem-
perature rises, the coolant temperature display
will begin to flash. If the coolant temperature
continues to rise, the message "HI" will flash.
TIP
• The coolant temperature display can be set to
"°C" or "°F". To switch the temperature units,
turn the key to " " (off), then hold the "RE-
SET" button pushed and turn the key to "
(on).
• The radiator fan turns on and off automatically
according to the coolant temperature.
Fuel gauge
1
1. Fuel gauge
The fuel gauge indicates the amount of fuel in
the fuel tank. The display segments of the fuel
gauge disappear from "F" (full) towards "E"
(empty) as the fuel level decreases. When the
last segment of the fuel gauge starts flashing, re-
fuel as soon as possible.
TIP
This fuel gauge is equipped with a self-diagnosis
system. If a problem is detected in an electrical
circuit, the fuel gauge will flash repeatedly. If this
occurs, check the electrical circuit.
1
"
Refer to "SIGNALING SYSTEM" on page 9-23.
Transmission gear display
1
1. Transmission gear display
2. Neutral indicator light "N"
This display shows the selected gear. The neu-
tral position is indicated by "N" and by the neutral
indicator light "N".
Shift light control mode
1
1. Shift light
2. "MODE" button
3. "RESET" button
The shift light has three settings which can be
adjusted.
• Flashing pattern: this function allows you to
choose whether or not the light will come on
and whether it should flash or stay on when ac-
tivated.
• Activation point: this function allows you to se-
lect the engine speed at which the light is acti-
vated.
• Deactivation point: this function allows you to
select the engine speed at which the light is de-
activated.
1-4
FEATURES
2
2
3