fantastic furniture Lunar Quick Start Manual page 7

Step 5
Two People
You will need
Phillips Head
Screwdriver
This is how a cam nut works...
- Attach foot board (P2) to panels (P3), (P4) & (P5).
- Align all the holes and turn the cam nuts on panels (P3), (P4) & (P5) clockwise with a
phillips head screwdriver.
Step 6
You will need
4 x Short Bolts Phillips Head
(H8) Screwdriver
- Insert 4 x short bolts (H8) to foot board (P2) and tighten with a phillips head
screwdriver.
fantasticfurniture.com.au
e uired
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
P4
P3
P4
P5
P3
H8
H8
P2
P2
Page 7