fantastic furniture Lunar Quick Start Manual page 6

Step 3
You will need
1 x Allen Key
4 x Long Bolts
M6x50mm (H2) (H7)
Ensure slot is facing incoming bolt
H2
- Secure the head board (P1) to the side rails (P3) & (P4) with 4 x long bolts (H2) using an allen
key (H7).
Step 4
You will need
4 x Short Bolts Phillips Head
(H8) Screwdriver
This is how a cam nut works...
- Attach centre support (P5) to head board (P1).
- Align holes and turn the cam nuts on centre support (P5) clockwise with a
phillips head screwdriver to lock in position.
- To secure the side rails (P3) & (P4) to the head board (P1), insert 4 x short
bolts (H8) and tighten with a phillips head screwdriver.
fantasticfurniture.com.au
H2
H2
H2
H7
H2
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
P1
P3
P1
P3
Two People
e uired
P4
H8
H8
P4
P5
Page 6