Trane Symbio 700 User Manual page 9

Figure 3. Symbio 700 Bluetooth status
5. Start the mobile app on your smart device.
Figure 4. Login screen
6. On the login screen, press View Available Devices in the lower portion of the screen. Or Trane
7. On the Unit List page, select the Symbio 700 controller to pair with. If the controller is not listed,
Note: If a Symbio 700 is not the original Symbio controller as shipped with the equipment, the Bluetooth
8. When prompted, pair the app to the Symbio 700 controller. A popup message displays a 6-digit
BAS-SVU054B-EN
personnel can login using their Trane Connect user name and password.
press the refresh arrow in the upper right-hand corner of the screen.
equipment list will list the controller serial number, instead of the equipment serial number.
random number. The same number is shown on the display of the Symbio 700 controller until the
pairing is complete, allowing the user to confirm connection to the intended controller.
Symbio Service and Installation Mobile Application
9