Advertisement
Quick Links
How to Assemble The Balanced Body
Reformer Trapeze Combination
THIS IS A MEDICAL DEVICE
REFORMER PARTS LIST
DESCRIPTION
Cotton Footstrap
Red Reformer Spring
Blue Reformer Spring
Green Reformer Spring
Ropes w/Snaps (pair)
Single Loop, Cotton (pair)
Neoprene Handles (pair)
Standard Sitting Box
Mat Conversion
Extension Stopper
Retractrable Risers (pair)
Shoulder Rest (pair)
CANOPY/TRAPEZE PARTS LIST
PART NO.
QTY
210-030
1
Ankle Velcro (pair)
SPR9070
3
Long Cotton Web, Black (pair)
SPR9071
1
Thigh Velcro (pair)
SPR9293
1
Wool Fuzzy (pair)
210-026
1
Belly Strap - Black
101-005
1
Push Through Bar for slider assembly
101-016
1
Red Trapeze Spring
721-002
1
Yellow Trapeze Spring
707-068
1
Blue Trapeze Spring
200-211
1
Long Yellow Spring
950-184
1
Long Purple Spring
950-042
1
Safety Strap
Trapeze Bar Assembly
Vertical Tubes with PTB installed
Vertical Tubes with Slider Bar installed
Canopy Top Assembly with Slider Bar
Push Through Bar Shoulder Bolt
Push Through Bar 4th Side
Button head Screw with Pin End
3/16" Allen Wrench
21mm x 1/2" wrench
7/32" Allen wrench
Balanced Body, Inc.
5909 88th St,
Sacramento, CA 95828 USA
®
™
DESCRIPTION
TOOLS
1-800-PILATES | +1-916-388-2838
pilates.com | info@pilates.com
PART NO.
QTY
101-001
1
101-026
1
101-020
1
101-022
1
210-034
1
707-285
1
SPR9001
2
SPR9002
2
SPR9004
2
SPR9006
2
SPR9461
2
210-058
1
950-059
1
N/A
1
N/A
1
N/A
1
619-202
2
TRP0109
1
619-200
2
PART NO.
QTY
GEN9280
1
ALL0060
1
TOL1358
1
EC
Balanced Body, In
Sacramento, CA
001-916-388-2838
Contact Us
17301 | 2021-04
Advertisement
Related Manuals for Balanced Body Reformer Trapeze Combination
Summary of Contents for Balanced Body Reformer Trapeze Combination
- Page 1 How to Assemble The Balanced Body ® Reformer Trapeze Combination ™ THIS IS A MEDICAL DEVICE REFORMER PARTS LIST CANOPY/TRAPEZE PARTS LIST DESCRIPTION PART NO. DESCRIPTION PART NO. Cotton Footstrap 210-030 Ankle Velcro (pair) 101-001 Red Reformer Spring SPR9070 Long Cotton Web, Black (pair)
- Page 2 STATEMENT OF INTENDED USE DECLARACIÓN DE USO PREVISTO The Reformer Trapeze Combination™ device is intended by El dispositivo Reformer Trapeze Combination™ está diseñado the manufacturer to be used by people for the purposes of con fines de fisioterapia, rehabilitación, prevención, tratamiento...
- Page 3 Corner Connector Top Slider Canopy Top Cotton Webs with Fuzzies Push Through Bar (PTB) Leg Springs b a Quick Release Knob Roll Down Bar Safety Strap Slider Vertical Tubes b Flange Connectors Belly Strap (not shown) Mat Conversion (not shown)
- Page 4 Shoulder Rests h Footbar b Risers Reformer Mode ASSEMBLE THE TRAPEZE CANOPY 2. Insert the provided cotter pins into each of the 1/8” holes near the bottom ends of the other two vertical tubes. Pick up the 1. Using the provided 3/16” allen wrench, loosen the set screws tube assembly with the vertical slider and place the tube ends in each of the eight flange connectors mounted to the outside into the flanges on the foot end of the frame.
- Page 5 INSTALLING SHOULDER RESTS AND POSTS INSTALLING/REMOVING THE PUSH THROUGH BAR (PTB) 4TH SIDE 1. Note the two protruding studs on the bottom of the shoulder rests. Lower the shoulder rest studs into the key holes and Using the provided 7/32” allen wrench and button head screws slide shoulder rests away from the carriage pad.
-
Page 6: Weekly Maintenance
If the pins do not stay in the tube with flaps facing the PTB. The Vinyl flaps should hang over holes, the pull knobs need to be replaced; call Balanced Body for the head-end of frame. They are designed to protect the mat replacement parts. - Page 7 ADDITIONAL SAFETY AND USAGE WARNING: This machine is potentially dangerous, and Balanced Body Inc. For additional usage and safety information or to view complete assumes no liability towards use or misuse. If you are not fully aware of the equipment manual translations (USER GUIDE #15452), please safety issues and use of this machine, do not use it.