Download
Share
Print this page
Balanced Body Allegro 2 Reformer Assembling
  1. Manuals
  2. Brands
  3. Balanced Body Manuals
  4. Medical Equipment
  5. Allegro 2 Reformer
  6. Assembling

Balanced Body Allegro 2 Reformer Assembling

Hide thumbs Also See for Allegro 2 Reformer:

Advertisement

Quick Links

Download this manual
Assembling the Allegro® 2 Reformer
from Balanced Body®
THIS IS A MEDICAL DEVICE
PARTS LIST
Description
Allegro 2 Reformer with carriage and ropes N/A
Allegro 2 Steel Footbar*
Shoulder rest (1 pair)
Riser**
Soft Touch double loops (1 pair)
Red spring
Blue spring
Yellow spring
Spring collar (set of 5)
Footbar bolt assemblies:
Bolt
Washer
Square Slider
Tools:
Wrench
*If you changed to the Allegro 2 Carbon Fiber Footbar, the part number is 17210.
** If your reformer was ordered with a Tower of Power, you will not receive risers.
You will use pulleys mounted to the Tower.
Part
Qty.
Number
1
617-070
1
950-168
1
950-165
2
101-034
1
SPR9070
3
SPR9071
1
SPR9241
1
950-162
1
617-044
2
17263
2
617-042
2
617-060
1
Balanced Body, Inc.
5909 88th St,
Sacramento, CA 95828 USA
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | info@pilates.com
17292 | 2021-05
EC
Balanced Body, In
Sacramento, CA
001-916-388-2838

Advertisement

loading

Related Manuals for Balanced Body Allegro 2 Reformer

Summary of Contents for Balanced Body Allegro 2 Reformer

  • Page 1 Balanced Body® THIS IS A MEDICAL DEVICE PARTS LIST Part Description Qty. Number Allegro 2 Reformer with carriage and ropes N/A Allegro 2 Steel Footbar* 617-070 Shoulder rest (1 pair) 950-168 Riser** 950-165 Soft Touch double loops (1 pair)
  • Page 2 STATEMENT OF INTENDED USE DECLARACIÓN DE USO PREVISTO The Allegro 2® Reformer device is intended by the manufacturer El dispositivo Allegro 2® Reformer está diseñado con fines de to be used by people for the purposes of physiotherapy, fisioterapia, rehabilitación, prevención, tratamiento y alivio de rehabilitation, the prevention, treatment and relief of injuries, lesiones, terapia de apoyo y funcional para una discapacidad supportive, functional therapy for a disability or for general...
  • Page 3 I. ASSEMBLING THE ALLEGRO 2 REFORMER A. OPENING THE BOX: C. INSTALL SHOULDER RESTS NOTE: For transport reasons there is a bungee cord attached 1. Insert the rods at the to the footbar mechanisms within the frame. This MUST BE bottom of each shoulder REMOVED before installing the footbar.
  • Page 4 4. To install, slide the footbar box from under the frame and NOTE: it is possible that the footbar may “catch” inside the rails remove the footbar. Take the footbar to the foot-end of the as you are moving forward. Shifting the footbar from side to side Reformer.
  • Page 5 E. INSTALL SPRING COLLARS slot, finger-tighten. Balanced Body springs come pre-installed. To install spring You will need to lift and jiggle the footbar while tightening the collars disconnect the spring from the foot-end of the Reformer.
  • Page 6 II. USING THE F. ATTACH COTTON LOOPS TO ROPES EASYSET FOOTBAR The ropes on the Allegro 2 come pre-installed. To install loops on the ropes simply feed the rope through the padded loop ring, around the big padded loop and pull tight as shown in Figure L. ADJUSTING FOOTBAR AND FOOTBAR POSITION For detailed information on how to use the Allegro 2’s SoftTouch To adjust between footbar positions, disengage the footbar by...

  • Page 7: Headrest Adjustment

    III. ADJUSTING THE IV. STORAGE SOFTTOUCH ROPE SYSTEM AND HEADRESTS STACKING Two people are recommended for stacking. The Allegro 2 must ROPE ADJUSTMENT: be stacked one on top of the other alternating foot-end and head-ends as shown in Figure P. The feet of the Reformer lock Refer to Arrow A in Figure O.

  • Page 8: Safety And Maintenance

    Allegro 2 at all times. » Contact Balanced Body for other upholstery and re-upholstery » If you feel pain, dizziness, or shortness of breath, stop options. Replacement upholstery is available from Balanced exercising immediately.
  • Page 9 Instructions for Allegro® 2 Reformer Options and Accessories INCLUDES INSTRUCTIONS FOR ALLEGRO 2: I. INSTALLING THE ALLEGRO 2 FOOT STRAP Feed the loops of the footstrap between the frame and standing » Foot Plate (jumpboard) Page 15 platform, through the footman’s loops, and then around the hook plates on the underside of the standing platform as shown in »...

  • Page 10: Parts List

    III. INSTALLING THE EXTENDED LEGS AND POSTS A. INSTALL LEGS IMPORTANT: Install the footbar first! PARTS LIST 1. Move the footbar into the vertical position (for stability). Insert footbar locking pins. Description Part number Qty. 2. If you have a hard floor put a Pilates mat on the floor next to 5/8”...

  • Page 11: Installing Wheels

    IV. INSTALLING THE WHEEL KITS 5/8” Alignment Screws Kit includes wheel brackets for right and left legs and Allen wrench for assembly purposes. Extended Leg Transport wheel kits are available for the Allegro 2 in both 3/8 Flat washer standard and extended leg configurations but they are not interchangeable.
  • Page 12 Tower installed. Figure J SECURITY STRAP For additional safety, Balanced Body offers a Vertical Storage Strap (part# 101-000), which fastens the Allegro 2 (without Tower) to a wall when in standing position with wheels.
  • Page 13 Installing the Tower on the Allegro® 2 PARTS LIST » Remove the two nuts at the head-end of the frame rails with the included wrench as Description Part Number Qty. shown in Figure A. Tower frame 617-061 Tower receiver brackets 950-171 »...
  • Page 14 Loosely re-install the four nuts removed in step 1. Receivers 5. INSTALL LOWER SPRING MOUNT should look as shown in Figure D. If required, remove existing risers. Insert the lower spring mount into the riser socket as shown in Figure G. Make sure the knobs underneath the Reformer have engaged with the spring mount and then hand tighten the knobs.
  • Page 15 » Repair any tears in the upholstery with an upholstery repair kit available at auto parts stores, or have the repair done locally. 9. OPTIONAL MAT CONVERSION » Call Balanced Body for other upholstery and re-upholstery options. To install the mat on the frame disengage the springs and move the carriage all the way to the head end of the Reformer.
  • Page 16 Para obtener instrucciones impresas, comuníquese con su vendedor. ATTENZIONE: questo macchinario è potenzialmente pericoloso e Balanced Body Inc. non si assume la responsabilità in caso Pour plus d’informations sur l’utilisation et les consignes de di utilizzo o di utilizzo improprio. Se non siete ben informati sécurité...