Changing The Program Lineup In Media Center; Setting Parental Controls - HP Media Center,Pavilion Media Center m260 Supplementary Manual

Changing the Program
Lineup in Media Center
Important:
Make sure you are connected to the Internet
before you try to download the Electronic Program
Guide or before you change the settings of the
Guide in Media Center.
1 Click Start, and then click Media Center.
2 In the Media Center Start menu, click
Settings.
3 Click TV/DVD.
4 Click Guide setup.
5 Click Change lineup, and follow the
onscreen instructions. When you enter your
postal code, do not leave any spaces. For
example, for Canadian postal code R2M 3Z4
you would enter R2M3Z4.
If you see an Invalid message, there is no
guide for your area.

Setting Parental Controls

If you set Media Center to block unrated
channels, an error could occur. It is
recommended that you make sure this option is
not selected.
To do this:
1 Click Start and then click Media Center.
2 Click Settings, TV/DVD, and then click
Parental control.
3 Enter your PIN number.
4 Select TV Ratings.
5 Make sure that Block unrated TV
programs is not selected.
6 If desired, you can select the Maximum
allowed TV rating setting, select a rating,
and then click OK. Selecting this setting does
not cause an error.
Updated HP Media Center PC Information
3