HP Media Center,Pavilion Media Center m260 Supplementary Manual page 10

To connect your multi-channel
speaker system to the PC
1 Turn off the PC.
2 Connect the three audio cable plugs from the
speaker system to the connectors on the back
of the PC (see the table).
Connect speaker
channels (plugs)
Front speakers
Rear speakers
Center/subwoofer
speakers
3 Turn on the PC.
4 Turn on your speaker system.
5 Configure the multi-channel audio output;
refer to the next procedure.
6
Updated HP Media Center PC Information
To PC back connector
Audio (Line) Out
(lime-green)
Audio (Line) In (blue)
Mic-1 (pink)
To configure multi-channel audio
output for PCs with Multi-channel
Sound Manager
1 Click Start on the taskbar.
2 Choose All Programs.
3 Choose Multi-channel Sound Manager,
and then click Multi-channel Sound
Manager again. The Multi-channel Audio
Configuration window opens.
Note:
If you do not see the Speaker Configuration tab,
your PC may not have the multi-channel option.
4 Click the Speaker Configuration tab. (Your
speakers may need to be plugged in to see
this tab.)
5 Select the option describing the number
of speakers in your system, for example,
6/5.1 speaker mode. You can click the
Speaker Test tab and then click each speaker
to test it.
6 Click OK.