Setting Closed Captioning; Installing Speakers; Connecting Altec Lansing Speakers - HP Media Center,Pavilion Media Center m260 Supplementary Manual

Setting Closed Captioning

If you set Media Center to display closed
captions while in window mode (not full-screen
mode), the window or the closed-caption text
may flash as the text scrolls in the window. To fix
this problem, change the display to full-screen
mode or turn off the closed-captioning option.
To turn off the closed-captioning option:
1 Click Start and then click Media Center.
2 Click Settings and then click Audio.
3 Click plus sign (+) to disable Caption display.

Installing Speakers

Connecting Altec Lansing Speakers

If your PC model came with the Altec Lansing
Speakers System Model 251, use the following
procedure to connect the speakers to a Sound
4
Updated HP Media Center PC Information
Blaster Audigy Audio Card on the back of the
PC. Also, refer to the setup information that came
with your PC and your speaker system.
Note:
If your PC uses an integrated 5.1 audio solution
(no audio card), refer to the section titled "Installing
multi-channel audio speakers" and disregard this
notice.
Your speaker system has a yellow plug that does
not match the color of the corresponding
connector on the back of the PC.
1 Plug this yellow tip of the subwoofer cable into
the orange audio card connector on the back
of your PC.
2 Plug the other two tips of the audio cable into
their matching color-coded connectors on the
back of the PC.
3 Follow the speaker system documentation to
connect the other speakers to the subwoofer.
