To Configure Multi-Channel Audio Output For Speakers Configuration; Understanding The 6-In-1 Memory Card Reader - HP Media Center,Pavilion Media Center 884 Supplementary Manual

Connect speaker
channels (plugs)
Front speakers
Rear speakers
Center/subwoofer
speakers
3 Turn on the PC.
4 Turn on your speaker system.
5 Configure the multi-channel audio output;
refer to the next procedure.
To configure multi-channel audio output
for speakers configuration
1 Click Start on the taskbar.
2 Choose All Programs.
3 Choose Multi-channel Sound Manager,
and then click Multi-channel Sound
Manager again. The Audio Configuration
window opens.
Note:
If you do not see the Speaker Configuration tab,
your PC does not have the multi-channel option.
To PC back connector
Audio (Line) Out (lime-green)
Audio (Line) In (blue)
Mic-1 (pink)
4 Click the Speaker Configuration tab. (Your
speakers must be connected to see this tab.)
5 Select the option describing the number
of speakers in your system, for example,
6 speaker mode (for 5.1 channels). You
can click the Speaker Test tab and then click on
a speaker to test it.
6 Click OK.
Understanding the
6-In-1 Memory Card Reader
The 6-In-1 memory card reader can read from
and write to six types of memory cards and to the
™
IBM Microdrive disk drive.
Special note about the
Safely Remove Hardware utility
Warning:
Do not click Stop in the Safely
Remove Hardware window while the USB
Mass Storage Device is selected. Doing so
removes the operating system recognition
of the 6-In-1 memory card reader from
your PC. You must restart the PC to use
your reader again.
Updated HP Media Center PC Information
5