HP Kayak xu700 User Manual page 46

2 Installing and Replacing Hardware Parts in Your PC Workstation
Replacing the Processor
Installing the New Processor
1 First ensure the processor is correctly oriented, then carefully lower the
new processor into place
ZIF lever.
2 Carefully remove all thermal bonding material from the underside of the
heatsink.
3 Affix the new thermal interface material (sticker or polymer, provided
with the new processor) to the underside of the heatsink.
4 Attach the heatsink onto the processor. If there are retaining clips, use
them to attach the heatsink. For easier access, attach the rear retaining
clip first.
5 Connect the heatsink power connector to the system board.
46
.
When the processor is fully inserted, close the