HP Kayak XA-s02 Hardware Manual page 14

Typical Diag Error
Messages
When the Processor and VRM are
correctly installed, the "smiling icon" is
shown on the LCD status panel.
If the Processor has only been partly
inserted in the processor slot (opposite
side to the VRM), then the displayed
message will indicate a CPU socket
error.
If the Processor has only been partly
inserted in the processor slot (closest
side to the VRM), then the
displayed message will indicate a
Power CPU 1 error.
The Processor has not been inserted
correctly in the processor slot. The
displayed message will indicate a BIOS
error.
The Processor has been correctly
installed in the processor slot. How-
ever, the VRM is not installed. The
displayed message will indicate a
Power CPU 1 error.
There is no installed Processor.
However, the VRM is correctly
installed. The displayed message will
indicate a Power error.
If one of the following fatal malfunctions occur, the displayed message will
indicate a BIOS error:
The BIOS no longer works.
There is no Flash.
MaxiLife Hardware Monitoring Chip
MaxiLife Test Sequence and Error Messages
14
Processor
Processor
Processor
HP KAYAK XA-s
VRM
VRM
CPU Socket
VRM
Power CPU 1
VRM
Power CPU 1
VRM
Power supply
Error!
Error!
Error!
BIOS
Error!
Error!
Error!
BIOS