Special Maintenance Requirements; Coolant; Dust Filter For Heating/Ventilation Replacement; Engine Oil Change And Filter Replacement - Chrysler Crossfire SRT6 Instruction Manual

Chrysler new vehicle instrution manual
Hide thumbs Also See for Crossfire SRT6:
Table of Contents

Advertisement

M
248 MAINTENANCE SCHEDULES
A
I

SPECIAL MAINTENANCE REQUIREMENTS

N
T

Coolant

E
Have the corrosion inhibitor/antifreeze concentration in
N
A
the coolant checked before the onset of winter (once a
N
year in countries with high prevailing temperatures).
C
Have the coolant replaced every five years or 100,000
E
miles (161,000 km).
S
C

Dust Filter for Heating/Ventilation Replacement

H
The dust filter is replaced during routine maintenance
E
service. The filter element must be replaced with "B"
D
U
Schedule service or every 18,500 miles (30,000 km) to
L
maintain effectiveness. However, if operating conditions
E
are dusty, these filters should be replaced more fre-
S
quently. A cover in the HVAC unit that can be reached
8
from the passenger foot well provides access to the filter
element.
ENGINE OIL CHANGE AND FILTER
REPLACEMENT
The recommended oil and filter change interval is based
on FSS or 1 year. Please refer to the heading FSS System
in this section for a full description of the use and
interpretation of symbols in the FSS system. Only use
synthetic engine oils, approved to MB 229.3 or MB 229.5,
such as Mobil 1 SAE 0W-40. The FSS may not alert for an
oil change at the proper interval if an unapproved engine
oil is used; engine damage and reduced engine life may
result. Information is available from your authorized
dealer. The oil filter should always be changed when the
oil is changed.

Advertisement

Table of Contents
loading

Table of Contents