Windshield Washer Reservoir - Chrysler Crossfire SRT6 Instruction Manual

Chrysler new vehicle instrution manual
Hide thumbs Also See for Crossfire SRT6:
Table of Contents

Advertisement

206 MAINTAINING YOUR VEHICLE
4. Install the new blade assembly onto the wiper arm tip
until it locks in place.

Windshield Washer Reservoir

The washer fluid reservoir is located in the engine
compartment and should be checked for fluid level at
regular intervals. Fill the reservoir with windshield
washer solvent (not radiator antifreeze) rated not to
freeze at -25°F (-31°C). Operate the system for a few
seconds to flush out the residual water.
WARNING!
Do not overfill the washer reservoir. Do not attempt
to fill to the top of the filler neck. Fluid may leak out
onto the floor or driveway causing a potential slip
and fall hazard. When the indicator light first illu-
minates, the maximum fill amount is 1 gallon or 4
liters.

Advertisement

Table of Contents
loading

Table of Contents