Installing Rimms - Compaq Evo W6000 Hardware Reference Manual

Hardware Upgrades

Installing RIMMs

2-8
WARNING: To reduce the risk of personal injury when replacing or
removing RIMMs, allow the module being removed from the RIMM
socket sufficient time to cool. RIMM temperatures can reach 212°F
(100°C).
CAUTION: When handling a RIMM, do not touch any of the contacts.
Doing so may damage the module.
CAUTION: Static electricity can damage the electronic components of the
workstation or option boards. Before beginning these procedures, ensure
that you are discharged of static electricity by briefly touching a grounded
metal object.
Before installing additional RIMMs, read "RIMM Installation Guidelines"
in this chapter.
CRIMMs must be installed in all unpopulated RIMM sockets on channels
being used.
To install a RIMM:
1. Shut down the operating system properly, then turn off the
workstation and any external devices. Disconnect the power cord
from the grounded AC outlet.
2. Remove the workstation access panel. See "Removing the
Workstation Access Panel" in this chapter.
3. Locate the RIMM sockets.
CAUTION: Be sure to follow the correct configuration guidelines or your
system will not function.
Compaq Evo Workstation W6000 Hardware Reference Guide