Special Mouse Functions; Serial Number Location; Changing From A Minitower To A Desktop Configuration - Compaq Evo W6000 Hardware Reference Manual

Special Mouse Functions

Serial Number Location

Changing from a Minitower to a Desktop Configuration

Compaq Evo Workstation W6000 Hardware Reference Guide
Most software applications support the use of a mouse. The functions
assigned to each mouse button depend on the software applications
you are using.
Each computer has a unique serial number located on the corner of
the computer access panel and on the rear panel of the computer.
Keep this number available for use when contacting Compaq
customer service.
To change from a minitower to a desktop configuration:
1. Shut down the operating system properly, then turn off the
workstation and any external devices.
2. Disconnect the power cord from the grounded AC outlet, then
disconnect the network cable and any external devices from the
system.
3. Remove the workstation access panel. See "Removing the
Workstation Access Panel" in Chapter 2.
4. Remove the front bezel. See "Removing the Front Bezel" in
Chapter 2.
5. Disconnect all power and data cables from the drives in the 5.25-
inch drive bays.
Product Features
1-9