Installing Network Drivers - Compaq Evo D310 MT Network Manual

Network Communications Guide
✎

Installing Network Drivers

✎
4
3. Change the Speed and Duplex values from Automatic/Auto
Duplex to the appropriate values, depending on the capabilities
of your network.
4. Exit the Network control application. You will be prompted to
restart your computer for the changes to take effect.
Refer to the documentation provided with the network controller for
additional information.
100Base-TX operation requires the use of Category 5 UTP cable with
an RJ-45 network connection.
The device drivers for the network controller enable the drivers to
load correctly in the operating system used, allowing communication
with the network.
Device drivers are supplied for the Microsoft Windows NT 4.0 and
Windows 98 or later operating systems, depending on the computer
model. If you are using another operating system, device drivers may
be installed from media included with the network operating system
or are available from Compaq. If reinstallation of the operating
system ever becomes necessary, use the Compaq Restore CD.
Network Communications Guide