KEMKRAFT KEI-095 Instructional Manual page 7

10. When the fifth number is entered, the display will show the next recommended angle to
be entered.
11. The display will instruct the operator to set the angle transducers to the next negative
angle. The recommended angle is -45 degrees, however any angle from 0 to the
previous angle can be used. Set the transducers to the angle and enter the 5 digits of the
angle (45.000)on the keyboard.
12. When the fifth number is entered, the display will go show the next recommended angle
to be entered.
13. The display will instruct the operator to set the angle transducers to the next negative
angle. The next recommended angle is -30 degrees, however any angle from 0 to the
previous angle can be used. Set the transducers to the angle and enter the 5 digits of the
angle (30.000)on the keyboard.
14. The display will instruct the operator to set the angle transducers to the next negative
angle. The next recommended angle is -15 degrees, however any angle from 0 to the
previous angle can be used. Set the transducers to the angle and enter the 5 digits of the
angle (15.000) on the keyboard.
15. The display will instruct the operator to set the angle transducers to the zero angle. The
recommended angle is 0 degrees, however any angle from the previous angle to the next
angle can be used. Set the transducers to the zero angle and enter the 5 digits of the
angle (00.000) on the keyboard.
16. The display will instruct the operator to set the angle transducers to the first positive
angle. The recommended angle is 15 degrees, however any angle from 0 to 99.999 can
be used. Set the transducers to the angle and enter the 5 digits of the angle (15.000) on
the keyboard.
17. The display will instruct the operator to set the angle transducers to the next positive
angle. The recommended angle is 30 degrees, however any angle greater than the
previous angle can be used. Set the transducers to the angle and enter the 5 digits of the
angle (30.000) on the keyboard.
18. The display will instruct the operator to set the angle transducers to the next positive
angle. The recommended angle is 45 degrees, however any angle greater than the
previous angle can be used. Set the transducers to the angle and enter the 5 digits of the
angle (45.000) on the keyboard.
19. The display will instruct the operator to set the angle transducers to the last positive
angle. The recommended angle is 60 degrees, however any angle greater than the
previous angle can be used. Set the transducers to the angle and enter the 5 digits of the
angle (60.000) on the keyboard.
96-002.doc
47650 CLIPPER DR. PLYMOUTH TWP., MI. 48170 (734) 414-6500
KEMKRAFT
MODEL KEI095/095A BRAKE PEDAL TESTER
ENGINEERING, INC.
Page 7 of 9 Revised: 21-AUG-96