Connect Devices - Tenda AP Series Quick Installation Manual

4. Connecting and configuring
your APs
Scenario 1: Deploying your network without
a management device for Tenda AP
Tips
Connect and configure your APs one by one. That is, connect one AP
to your PoE switch and configure it. After finished, connect the second
AP and repeat step
❶

Connect devices

Connect your AP to a PoE port of the PoE switch using an
Ethernet cable. Refer to the following figure for detailed
connection.
Check that the AP's LED indicator blinks and the lower-right
Internet icon on your computer is not displayed as
Laptop Smartphone
-
PoE switch
AP
Tablet
on it.
Uplink port
PC
Router
LAN WAN
.
Internet