Removing The Front Bezel - HP Deskpro 300 Hardware Reference Manual

Removing the Front Bezel

2-4 Hardware Upgrades
To remove the front bezel:
1. Shut down the operating system properly, then turn off the
workstation and any external devices.
2. Disconnect the power cord from the grounded AC outlet.
3. Remove the workstation access panel. See "Removing the
Workstation Access Panel" in this chapter.
4. Push in on the two front bezel release tabs
2
bezel away from the chassis to release it.
Pressing the two front bezel release tabs to remove the front bezel
When replacing the front bezel, ensure that the bottom hinge
points are properly placed in the chassis before rotating the
front bezel back into its original position.
1
, then rotate the front