Removing RIMMs
2-8 Hardware Upgrades
To install a memory module:
1.
Turn off the workstation and any external devices, then disconnect
the power cord from the grounded AC outlet.
On a power-managed system, the power cord must be
disconnected from the grounded AC outlet.
2.
Remove the workstation access panel and locate the RIMM
sockets.
CAUTION: Be sure to follow the correct configuration guidelines to
your respective memory board, or your system will not function.
3.
Refer to the following illustration to install a RIMM module.
Installing a RIMM module
4.
Reassemble the workstation.
To remove a memory module from a RIMM socket, reverse the
procedures in the previous section.