Table of Contents
Advertisement
Changing from a Minitower to a Desktop Configuration
1-6 Product Features
To change from a minitower to a desktop configuration:
1.
Shut down the operating system properly, then turn off the
workstation and any external devices.
2.
Disconnect the power cord from the grounded AC outlet then
disconnect the network cable and any external devices from the
system.
3.
Remove the workstation access panel. See "Removing the
Workstation Access Panel" in Chapter 2.
4.
Remove the front bezel. See to "Removing the Front Bezel" in
Chapter 2.
5.
Disconnect all power and data cables from the drives in the
5.25-inch drive bay.
6.
To release a drive from the 5.25-inch drive bay, slide the drivelock
as shown. Carefully push the drive from the back of the unit until
the drive casing can be grasped.
Releasing the drives with the drivelock
CAUTION: Do not hold the face plate while removing a drive. Only
hold a drive by its casing.
Advertisement
Table of Contents
