Energizer EZ20VCBC-UK User Manual page 5

c) Disconnect the plug from the power source and/or the battery pack from the powertool
before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool's operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous
situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper lips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained
ADDITIONAL SAFETY RULES FOR GRASS TRIMMER
Danger! The cutting elements continue to rotate after the motor is switched off
Before use check the tool and battery about signs of damage or ageing. If there are
damages or ageing, do not use the tool and bring it to a qualified service for inspections
and reparations.
Read the instruction carefully. Be familiar with the controls and proper use of the
equipment.
Local regulation may restrict the age of the operator.
Always wear substantial footwear and long trousers while operating the machine
Wear ear, eye and dust protection at all times. Wear also helmet, gloves and protection
clothes.
Never allow children, people unfamiliar with these instructions to use the trimmer.
Avoid using the trimmer while people, especially children, infirm people or pets, are nearly.
Use the trimmer only in daylight or good artificial light.
Never operate the trimmer with damaged guards or shields or without guards or shields in
place.
Switch on the motor only when the hands and feet are away from the cutting means.
Never fit metal cutting elements.
•
Use only the manufacturer's recommended placement parts and accessories.
Switch off and remove the battery when leaving the trimmer unattended.
Switch off and remove the battery before carrying out maintenance or cleaning work.
Inspect and maintain the trimmer regularly. Have the trimmer repaired only by an
authorised repairer.
Take care against injury from the cutting lines. After extending new cutter line or replacing
the spool line. Always return the trimmer to its normal operating position before switching
on.
5