1. SAFETY WARNINGS 1.1 GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades. Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact ...
2.2 TECHNICAL DATA Model EZ40VTHEN Rated voltage 36V d.c.(Max 40V d.c.) No load speed 1500 min Cutting length 600 mm Cutting capacity 27 mm Vibration <2.5 m/s² 1.5 m/s² Sound pressure level 90dB(A) K =3dB Sound power level 104dB(A) K =3 dB Weight without battery pack 3.2Kg...
3. OPERATION 1) Wear personal protective equipment (gloves, hearing and eye protection, protective clothing). 2) Remove the blade guard. 3) Place the battery in the hedge trimmer. Align the grooves in the battery with those in the battery compartment. Push the battery into its compartment to lock it in place. Make sure that the battery is properly installed to avoid any incident.
4. MAINTENANCE AND STORAGE WARNING: To prevent serious personal injury, remove the battery pack before servicing,cleaning, or removing material from the unit. 4.1 BLADE CARE Lubricate the cutting blades after each use. Periodically inspect the blades for damage and wear. Always use the manufacturer's specified replacement blades.
Do not use any strong detergents on the plastic housing or the handle. They can be damaged by certain aromatic oils such as pine and lemon, and by solvents such as kerosene. Moisture can cause a shock hazard. Wipe off any moisture with a soft dry cloth. Use a small brush or the air discharge of a small vacuum cleaner brush to clean the air vents on the battery pack housing and motor housing.
EC Declaration of conformity BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France Declares that the machine Designation: CORDLESS HEDGE TRIMMER Model: EZ40VTHEN Serial number: 20220126519-20220126818 Is in conformity with the European Directives: Machine Directive 2006/42/EC EMC Directive 2014/30/EU...
7. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor.
8. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine.
9. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the EZ40VTHEN and is the answer not in the manual?
Questions and answers