TCL LED23E4200 Service Manual page 9

4-WHITE BALANCE
5-SHOP
6-NVM reset
7-SET FAC CH
8-POWER ON
9-USB UPDATE
10
ReloadEFBItem...
Note: Below the factory menu, some model information are showed, including
software version, Project Name, SIACP Version, and SW release time.
ADC Submenu:
ITEMS Default
Setting
Source RGB/YPbP
r
(HD)
R-GAIN 4478
G-GAIN 4478
B-GAIN 4478
R-OFFSET 2048
G-OFFSET 2048
White Balance data adjustment（refer
as follow）
The balance data is set by PE before
the mass production.
adjust.
DO Reset
alignment;(This
remove all unnecessary factory value;
The factory hotkey will be turn off)
DO System initialization. Restore all
data except the White Balance and ADC
data ;Only for R&D.
DO Preset specific factory channels for
specific factory. Press left and
right button to select the factory,
and then press OK to confirm.
LAST ON: Always turns on TV when AC power
on
STB：Always goes to standby mode when
AC power on
LAST：Restore the status before the
last AC power off
USB update， （refer as follow）
This item only factory used，
Description
Sources need calibration. RGB means PC and
YPbPr(HD) means YPbPr
R-GAIN
R-GAIN
R-GAIN
B-OFFSET
B-OFFSET
第 3 页共 11 页
the set after
operation
OK
Do not need
production OK
will
OK
OK
OK
OK
Status
OK
OK
OK
OK
OK
OK