Creating A Lightscribe Label After Burning A Disc With Itunes; Setting Automatic Recording Options - HP Compaq Presario,Presario SR1010 Getting Started Manual

58
Getting Started Guide
Creating a LightScribe label after burning a disc
with iTunes
iTunes works with Sonic Express Labeler to allow you to burn labels on a data CD or
audio CD. The playlist you create in iTunes to burn a disc is automatically imported
into Express Labeler so that this information is available for you to use on your
LightScribe label. To use Express Labeler from iTunes, the data or music tracks in the
playlist you are using must fit on a single CD.
1 Click Start, All Programs, iTunes, and then click iTunes again.
2 Burn a data or audio CD with iTunes. When the burning process is complete,
click Yes on the Create LightScribe Label window.
3 In the Step 1: Select Project area, make sure that Disc Label is selected.
4 Select a label template by clicking Layout and choosing a layout. The various
layouts show different amounts of playlist information. Some show only the
playlist title and others show the playlist title and track names. You can edit
playlist information by clicking Text to open the Edit Text window.
5 Select a background, if desired, by clicking Background. Select one of the
provided backgrounds or click More to find one of your own images to use as
a background.
LightScribe creates a grayscale (monochrome) image similar to a black
NOTE:
and white photograph.
6 When you are satisfied with the appearance of your label design, insert the
LightScribe disc (label side down) into the disc drive tray and then click Print.
7 From the Disc Label menu, select LightScribe 12cm Disc.
8 Select a Contrast Level and then click OK to begin burning the label.
The estimated time to complete the label displays, along with a progress bar to
show you the time remaining. You can continue to work on your PC while
LightScribe is burning the label.

Setting Automatic Recording Options

When you first insert a blank CD into your DVD Writer or CD Writer drive, you may
see options for the type of disc you insert.
When you insert a blank DVD into your DVD Writer/CD Writer drive, an
NOTE:
options window does not appear. You must open the program you want to use with
your DVD, and then perform an action.