Saving An Image; Burning An Image; Using Disc Labels - HP Compaq Presario,Presario SR1010 Getting Started Manual

Saving an Image

1 Click Start, choose All Programs, Sonic RecordNow!, and then click
RecordNow!.
2 Select the Backup Projects tab.
3 Select Save Image.
4 Insert the source disc into the drive.
5 Click Browse to set the destination and name of the image file.
6 Click the Save icon to create the image file.

Burning an Image

1 Click Start, choose All Programs, Sonic RecordNow!, and then click
RecordNow!.
2 Select the Backup Projects tab.
3 Select Burn Image.
4 Click the Browse button to locate your saved image file.
5 Click the Burn icon.
6 Insert a blank recordable CD or DVD into the drive.
7 Click Done when recording is complete.
Recording Video Files
Video quality depends on the quality of the source files, the PC speed, and its
graphics processing ability. Refer to the "Recording VHS analog video direct to DVD
(select models only)" section of this guide.
Your DVD Writer or CD Writer drive will not copy commercially available
NOTE:
DVD movies. Most commercial DVDs are encoded to prevent unauthorized
duplication.

Using Disc Labels

WARNING: When labeling your DVDs, do not use sticky labels. They
can cause the DVD to play erratically. Instead, write on the DVD with
a felt-tip pen to label it.
Creating CDs and DVDs
55