46
Getting Started Guide
Saving an Image
1 Click Start, choose All Programs, CD (DVD) Recorder, RecordNow!,
and then click RecordNow! again.
2 Select the Backup Projects tab.
3 Select Save Image.
4 Insert the source disc into the drive.
5 Click Browse to set the destination and name of the image file.
6 Click the Save icon to create the image file.
Burning an Image
1 Click Start, choose All Programs, CD (DVD) Recorder, RecordNow!,
and then click RecordNow! again.
2 Select the Backup Projects tab.
3 Select Burn Image.
4 Click the Browse button to locate your saved image file.
5 Click the Burn icon.
6 Insert a blank CD or DVD into the drive.
7 Click Done when recording is complete.
About Recording Video Files
Video quality depends on the quality of the source files, the PC speed, and its
graphics processing ability. Refer to the "Recording VHS Video Files Direct to
DVD" section on page 64 of this guide.
Your DVD Writer or CD Writer drive will not copy commercially available
NOTE:
DVD movies. Most commercial DVDs are encoded to prevent unauthorized
duplication.
Disc Labels
WARNING: When labeling your DVDs, do not use sticky labels. They
can cause the DVD to play erratically. Instead, write on the DVD
with a felt tip pen to label it.
Creating Recovery CD/DVDs for the PC
For more information about creating Recovery CDs/DVDs, refer to the Warranty
and Support Guide that came with your PC.