Using The Preview Window; Using The Media Library; Using The Storyboard; Identifying Requirements For Capturing Video - HP Compaq Presario,Presario SR1005 Getting Started Manual

72
Getting Started Guide

Using the Preview Window

The Preview window is located in the upper-left corner. It behaves differently for
each task.
Capture: Displays what your capture device is viewing.
Edit: Plays back the selected video or displays the selected image.
Add Menu: Displays what your menu and buttons look like.

Using the Media Library

The Media Library contains your video clips, images, and audio tracks. To import
existing media files from your hard disk or CDs into your Media Library, click the
Drag and Drop button.
Capture: Located in bottom right corner. Contains your video clips, images,
and audio tracks.
Edit: Located in upper-right corner. Contains your video clips, images, and
audio tracks.
Add Menu: Located in upper-right corner. Contains menu themes, video
backgrounds, audio tracks, images, buttons, chapter layouts, and chapter
thumbnails.

Using the Storyboard

The Storyboard is located on the bottom of the Edit and Add Menu area. The
Storyboard can be displayed in either Menu Picker or Timeline Mode. Use the
Storyboard to organize your media and add special effects such as titles,
transition effects, audio tracks, and video filters.
Identifying Requirements for
Capturing Video
You can copy (capture) video files to your hard disk drive by using the WinDVD
Creator program. Among the devices supported by WinDVD Creator are analog
video devices, digital camcorders, and Web cameras. Use composite or S-Video
inputs to capture video from a VCR, or an analog video camera.
To capture video files, you need to:
•
Connect your video source device properly.
•
Turn your device on and set it to playback mode.
•
Make sure the program you want to use can detect your digital or
analog device. In the WinDVD Creator capture screen, click your input source,
click the wrench icon, select the Device Control tab, and select your source
from the Video Source drop-down menu.