Acorp 4PE800 Manual page 40

Table of Contents

Advertisement

Chapter 2
APIC Mode
Allows user to disable/enabble the APIC mode
The Choices: Disabled; Enabled
x MPS Version Control For OS
If APIC mode is enabled, this item allows user to select the MPS
Version Control For OS.
The choices: 1.4; 1.1
OS Select For DRAM >64MB
Select the operating system that is running with greater than
64MB of RAM on the system.
The Choices: Non-OS2(default), OS2.
HDD S.M.A.R.T. Capability
Allows user to choose the Self-monitoring Analysis and
Reporting Technology for Hard Disk Drive.
The choices: Disabled(default); Enabled
EPA / (H/W Monitor) Show
Use this item to enable/disable the Environmental Protection
Association (EPA) / Hardware Monitor) logo on initiating screen..
The choices: H/W Monitor; EPA Logo
4PE800 BIOS Setup
2-40

Advertisement

Table of Contents
loading

Table of Contents