Chrysler 2005 300 Manual page 71

To activate the UConnect™ system from idle, simply
press the 'Phone' button and follow audible prompts for
directions. All UConnect™ system sessions begin with a
press of the 'Phone' button on the mirror.
Cancel Command
At any prompt, after the voice on beep, you can say
Cancel and you will be returned to the main menu.
However, in a few instances the system will take you
back to the previous menu.
Pair (Link) UConnect™ System to a Cellular Phone
To begin using your UConnect™ system, you must pair
your compatible Bluetooth™ enabled cellular phone (re-
fer to Introduction section to learn about the phone
type). To complete the pairing process, you will need to
reference your cellular phone owner's manual. One of the
following vehicle specific websites may also provide
detailed instructions for pairing with the brand of phone
that you have:
NOTE: www.chrysler.com/uconnect
The following are general phone to UConnect™ System
pairing instructions:
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 71
• Press the 'Phone' button to begin.
• After the Ready prompt and the following beep, say
Setup Phone Pairing.
• When prompted, after the voice on beep, say Pair a
Phone.
• You will be asked to say a four-digit pin number which
you will later need to enter into your cellular. You can
enter any four-digit pin number. You will not need to
remember this pin number after the initial pairing
process.
• The UConnect™ system will then prompt you to begin
the cellular phone pairing process on your cellular
phone. Before attempting to pair phone, please see
your cellular phone's user manual (Bluetooth section)
for instructions on how to complete this step.
• For identification purposes, you will be prompted to
give the UConnect™ system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
3