Drive Belt (For Generator, Water Pump, Power Steering Pump) - Chrysler 2004 Sebring Coupe Manual

DRIVE BELT (FOR GENERATOR, WATER PUMP,
POWER STEERING PUMP)
2.4 liter engine
Water pump pulley
Crank shaft
pulley
Check the tension of the drive belt. The deflection must
be within specifications, when depressed at a point
midway between the pulleys as shown in the illustrations
with a force of about 100 N (22 lb.).
Inspect the drive belt for evidence of cuts and cracks, and
replace it if damaged. When replacing the belt with a new
belt, make sure that there is no interference between the
Power steering
belt and other engine components.
pump pulley
Then, check the tension of the belt at the designated
point. The deflection must be within specification.
A/C
pulley
M50A0620
MAINTENANCE 327
9
M50A0820