Land Pride QH05 Series Operator's Manual page 24

Quick hitches
Hide thumbs Also See for QH05 Series:
Table of Contents

Advertisement

Section 1: Assembly & Set-Up
37298a
37298a
Unhook Tractor From Quick Hitch
!
CAUTION
To avoid minor or moderate injury:
Keep a firm grip on the Quick Hitch at all times while
unhooking it from a tractor. Keep feet and all other body
extremities out from under the lower 3-point hitch areas as the
unit could fall causing serious injury. When possible, have a
second person on hand to help.
Refer to Figure 1-12 & Figure 1-13:
Shut tractor down according to "Tractor Shutdown
1.
Procedure" on page 11.
2. Set release levers/handles (#1) to make Quick Hitch
ready for hook-up to an implement as follows:
Refer to Figure 1-12: Move QH05 release
levers (#1) from locking notches to forward position
as shown.
Refer to Figure 1-13: Rotate QH16, QH20, or QH30
release handles (#1) down to the position shown.
20
QH05, QH16, QH20, & QH30 Quick Hitches 320-003M
Table of Contents
1
Center
3-Point Link
Power
Take-off Shaft
Drawbar
3-Point
Lift Arms
Unhook Tractor From QH05 Quick Hitch
Figure 1-12
Center
3-Point Link
Power
Take-off Shaft
Drawbar
3-Point
Lift Arms
Unhook Tractor From QH16, QH20 & QH30 Quick Hitches
Figure 1-13
Locking Notch
8
Release Lever
Linchpin
4
Hitch Pin
5
Release Handle
Linchpin
4
Hitch Pin
5
IMPORTANT: Because of its weight, unhooking the
QH30 by yourself is not recommended. Use an
overhead hoist or the help of a second person to
unhook the QH30 from your tractor.
3. Keep Quick Hitch from rotating on lower 3-point hitch
pins (#5) while removing upper center hairpin
cotter (#2) and hitch pin (#3). Secure center 3-point
link in its retainer at the back of the tractor.
4. Continue supporting Quick Hitch while removing
lower 3-point linchpin (#4) and hitch pin (#5) on the
right-hand side. Lower right-hand side of Quick Hitch
to ground.
5. Continue to support Quick Hitch while removing
remaining linchpin (#4) and hitch pin (#5) on the left-
hand side. Lower left-hand side of Quick Hitch to the
ground.
6. Replace removed hitch pins (#3 & #5), linchpins (#4),
and hairpin cotter (#2) in the Quick Hitch for safe
keeping.
7.
Store Quick Hitch in an area where it can easily be
seen and not hidden by grass and weeds growing
over it.
Hairpin Cotter
2
Upper Hook
6
Hitch Pin
3
Auto-lock
Hooks
37123
1
Hairpin Cotter
2
Upper Hook
6
Hitch Pin
3
Auto-lock
Hooks
37199
7/15/22
7
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qh16 seriesQh20 seriesQh30 series

Table of Contents