Replacing The Side Panel - HP Compaq Presario,Presario CQ5110F Supplementary Manual
Hp compaq presario,presario cq5110f: supplementary guide
Hide thumbs
Also See for Compaq Presario,Presario CQ5110F:
- Maintenance and service manual (278 pages) ,
- User manual (239 pages) ,
- Hardware and software manual (223 pages)
Table of Contents
Advertisement
4
Upgrading and Servicing Guide
Replacing the Side Panel
1
Align the tabs at the bottom of the side panel to the ridge on the bottom of the chassis.
Place the side panel in the proper position on the chassis and slide it toward the front
of the chassis.
A
NOTE: There is a 3mm gap between the top of the side panel and the top of the
chassis when the side panel is attached properly.
2
Ensure that the hole for the thumbscrew aligns with the hole in the chassis, and then
replace the thumbscrew (A).
3
See "After Closing the PC" on page 3.
Hide quick links:
Advertisement
Table of Contents
