Adding Or Replacing The Memory Card Reader - HP Compaq Presario,Presario CQ5110F Supplementary Manual

16
Upgrading and Servicing Guide

Adding or Replacing the Memory Card Reader

1 Complete the procedures to remove the memory card reader, if necessary. See
"Removing the Memory Card Reader" on page 15.
2 Slide the memory card reader part way into the front of the chassis.
3 Attach the cable to the back of the memory card reader.
4 Push the memory card reader into the chassis until the screw hole on the chassis is
aligned with the screw hole on the right side of the memory card reader, and then
insert the screw to secure the memory card reader to the chassis.
5 Complete the procedures to replace the front panel, replace the side panel, and close
the PC. See "Opening and Closing the PC" on page 1.