Page 1
WIRELESS SWITCHES KEY FOB Combination of iNELS switching element for universal use. It can be used to control electrical appliances, lights, sockets, garage doors, etc.
Page 2
EAN 8595188184588 (Controller – key fob Black + 1x Switch unit, 1-channel) The individual elements in the iNELS set are paired and their functions are preset. iNELS kit with key fob enables the basic function of controlling electrical appliances - ON / OFF. The appliances can be controlled independently by a key fob.
Page 3
Detailed manual Controller – key fob RF KEY-40 RF KEY 40/B – 4 button controller - keychain (remote control), black RF KEY 40/W – 4 button controller - keychain (remote control), white RF KEY 40 Characteristics • Key fob-sized remote control - used to control, lights, gate, garage door, shitters, etc. •...
Page 4
EN 60669, EN 300 220, EN 301489, Related standards: No 426/2000 Coll. Attention When you install iNELS RF Control system, you have to keep a minimal distance of 1 cm (0.4“) between each unit. Between the individual commands must be an interval of at least 1s.
Page 5
• The programming button on the unit is also used for manual control of the output. • Memory status can be pre-set in the event of a power failure. • For components labeled as iNELS RF Control2 (RFIO2), it is possible to set the repeater function via the RFAF/USB service device.
Page 6
Technical parameters RFSAI-11B-SL Supply voltage: 230 V AC Supply voltage frequency: 50-60 Hz 7 VA / cos φ = 0.1 / 0.7 W Power apparent / dissipated: Output: Number of contacts: 1x switching contacts (AgSnO Rated current: / switching power 8 A / AC1 / 2000 VA Peak current: 10 A / <3 s...
Page 7
Compatibility The device can be combined with devices of iNELS RF Control with RFIO protocol. RFSAI-11B-SL Connection S - external input N - neutral wire L - phase wire V - output The screw-less terminal Solid conductor i - programing button...
Page 8
Radiofrequency signal penetration through various construction materials Range up to 200 m (2 inch) in open space, if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO that supports this feature. 60 - 90 % 80 - 95 % 20 - 60 %...
Page 9
Warning Instruction manual is designated for mounting and also for the usage of the device. It is always a part of its pac- king. Installation and connection can be carried out only by a person with adequate professional qualifi cation with understanding this instruction manual and functions of the device, and while observing all valid regulations.