Hardware Setup - ETC Eos Setup Manual

ETC Setup Guide
Eos Rackmount Devices
Eos Apex Processor
A fully-functional controller in a rackmount unit, ETC's Eos Apex Processor can provide primary
and backup control for Eos Apex systems, or be used as a stand-alone lighting playback unit. A 2U
device, it can be mounted into 19" equipment racks or road cases.
The Apex Processor ships with the following:
One three-button scroll mouse and mousepad
•
Alpha-numeric keyboard
•
Locking regionalized IEC power cord
•
Two 19-inch rack-mount ears and mounting hardware
•
Four rubberized feet (for desktop use)
•
Augment3d AR target kit
•

Hardware Setup

Note:
1
2
1. IEC power connector
2. Hard power switch
3. Display Port
Insert the locking power cord into the IEC power connector. Connect the mouse and keyboard to
USB ports, any monitors to the Display Ports, and any network cables to the Ethernet ports. Once
all accessories have been connected, you may activate the hard power switch above the power
connector.
Eos Rackmount Devices
For information on mounting the Apex Processor in a rack, see
3
4
5
4. USB-A & USB-C (data)
5. SFP+
6. Ethernet
Page 3 of 12
Rack Mounting.
6
ETC