Table of Contents
Advertisement
Additional Safety Instructions for Pan and
1.
OVERLOADING PAN AND BOX BRAKE.
Overloading this tool can cause injury from
flying parts. Do not exceed the capacities
specified on Page 3.
2.
USING TORCHES. Heating metal with a
torch while the metal is in the pan and box
brake will weaken the fingers.
3.
METAL EDGES. Always chamfer and de-
burr sharp sheet metal edges before bend-
ing in the pan and box brake. Sharp edges
on sheet metal can cut your fingers to the
bone.
4.
PINCHING. Lower the fingers when not in
use, to prevent pinching hazard.
Like all machines there is danger associ-
ated with the Model G0578. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to lessen the pos-
sibility of operator injury. If normal safety
precautions are overlooked or ignored, seri-
ous personal injury may occur.
G0578 40" Pan and Box Brake
Box Brakes
5.
6.
7.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
GLOVES AND GLASSES. Always wear
leather gloves and approved safety glasses
when using this tool.
EXPERIENCING DIFFICULTIES. If at
any time you are experiencing difficulties
performing the intended operation, STOP
using the tool and contact our Technical
Support at (570) 546-9663, or ask a quali-
fied expert how the operation should be
performed.
TOOLS IN POOR CONDITION. Inspect
the pan and box brake for any cracked link-
age, levers, or loose fasteners. Correct any
problems before use.
7
Advertisement
Table of Contents
