Printing Maintenance - Canon S330 Quick Start Manual

3.
Click the Maintenance tab, then click
Cleaning. Select the nozzles to be
cleaned, then click Execute. The
printer will clean the print head.
4.
Click OK to close the window.
5.
After the cleaning, print a nozzle
check pattern to check the results.
6.
If there is no change after cleaning,
perform a print head deep cleaning
by choosing Cleaning from the drop-
down menu, then clicking the Deep Cleaning icon.
If the print head is still not clean after deep cleaning, contact
the Customer Care Center.
To clean the print head in Mac OS:
1.
Make sure the printer is on.
2.
From an application File menu, click Page
Setup.
3.
Click Utilities. The Canon S330 Printer Utility
dialog box will appear.
4.
Click the Cleaning icon.
5.
Select the nozzles to be cleaned, then click OK. The printer will clean the print
head.
6.
When done, click Close.
7.
After the cleaning, print a nozzle check pattern to check the results. See
"Printing a Nozzle Check Pattern" on page 21.
8.
If there is no change after cleaning, perform a print head deep cleaning by
choosing Cleaning from the drop-down menu and clicking the Deep Cleaning
icon. When finished, print a nozzle check pattern to verify that the print head
is clean.
If the print head is still not clean after deep cleaning, contact
the Customer Care Center.

Printing Maintenance

23