Appendix
Installing the Printer Driver
If you are re-installing the printer driver, first follow the uninstall procedures on
page 44 to remove the existing printer driver before you re-install.
To install the printer driver in Windows:
1.
Turn the printer off.
2.
Make sure the USB cable between the printer and computer is securely
connected.
3.
Close any open software applications. Insert the S330 Setup Software &
User's Guide CD-ROM in the CD-ROM drive. The setup program should run
automatically.
4.
Read the License Agreement, then click Yes to continue. When the main menu
appears, click Printer Driver, then click Install. The printer driver will start
loading.
5.
When prompted, TURN THE PRINTER ON so the computer can begin identifying
the printer port being used.
If the printer was on when the setup program started, the Add
New Hardware Wizard will appear. Do NOT use the wizard—click
Cancel to close the window and continue.
If the setup program does not run automatically, click Start,
then Run, then type D:\MSETUP.EXE (where D is the CD-ROM
drive), then press Enter.
If a message prompts you to restart Windows, remove the
CD-ROM, then click OK. After the computer restarts, re-insert
the CD-ROM and continue.
If your computer cannot detect a printer port, see the tip,
"Computer cannot detect a printer port" on page 36.
43