Operation - Makita CL002G Instruction Manual

3. Overlap the frame of dust stopper with that of the paper filter.
Fig.18
4. Place the dust stopper and the paper filter together into the
cleaner cavity in the same direction of arrow on the dust stopper.
Insert them all the way into the slots in the cleaner cavity.
Fig.19
5. Spread the container part of the paper filter inside the cleaner.
Fig.20
6. Close the front cover completely.
Fig.21
► 1. Front cover
1
9 ENGLISH

OPERATION

CAUTION:
Do not move your face close to
the air vent when operating the cleaner. If foreign
objects are blown into eyes, it may result in personal
injury.
Installing and removing cleaner
attachments
CAUTION:
After installing attachments, check
if they are securely installed. If the attachments are
installed imperfectly, they may come off and cause
personal injury.
CAUTION:
Be careful not to hit your hand on
the wall etc. when removing the attachments.
When using attachment with lock
function
To install attachment, insert it to the suction inlet of the cleaner
until it clicks. Make sure that the attachment is locked.
3
Fig.22
► 1. Suction inlet 2. Attachment with lock function
3. Hook
NOTICE:
When installing the attachment with
lock function, be sure to align the release button
on the cleaner with the hook on the attachment. If
they are not aligned, the attachment will not be locked
and may come off from the cleaner.
To remove, pull the attachment while pushing the
release button.
1
Fig.23
► 1. Release button 2. Attachment with lock function
1
2
2