Advertisement
CV-550SPK V3 WATERPROOF KEYPAD
INSTA L L AT I O N I NST RU CTI ONS
Enter Programming Mode
Exit Programming Mode
Change Admin Password
Default Master Code
Restore Configuration to Factory Defaults
Delete All Users Card/PIN Data
Stand-Alone Operation (All Card/PIN Data stored in the CV-550SPK V3)
Single Door Stand-Alone
ID#
Add a Card (Automatically Generates ID#)
Add a Card or PIN
(To a Specific ID#)
Delete Card (by Reading)
Delete by ID# (Card or PIN)
Door Access Mode
Unlock Duration
Page 2 of 7
Press the star (*) key for 2 seconds until it beeps then press
8 8 8 8 8 8 #.
The LED will now be flashing Red.
Press the star key (*) to get a solid Red LED.
00 New 6-digit code #, New 6-digit code # (must be 6 digits).
The keypad cannot be configured until the Master Code has
been changed from its default to any other 6-digit PIN.
Power up while holding the * key. The LED will turn orange
and you will hear a double beep.
This will only default the Master Code for programming. All
other data will not be affected.
For assistance call the Camden Technical Support line at
1-905-366-3377.
Press 20 0000 # Deletes All User Card/PIN data.
03 1 # Stand-Alone Mode
This refers to the memory address of where the Card or PIN
data is stored. It is not the PIN to unlock the door.
Keep track of where data is stored to easily edit or delete any
individual record.
10 Read Card #
Multiple Entries 10 Read Card, Read Card, Read Card, Read
Card #. This will increment the ID# (storage location) by one
for each card added.
11 ID# (4-Digit PIN or Card) #
Multiple Entries 11(ID) #, (User PIN or Card) #, (ID) #, (User
PIN or Card) #
This will allow you to pick a unique ID # (storage location) to
add the card or PIN to.
21 Read Card Multiple Deletes 21 Read, Read, Read, #
22 ID# # Multiple Deletes 22 ID# #, ID# #, ID# #
30 0 # (Card Only) Users must only use a Card or Tag.
30 1 # (Card + PIN) Users must read their Card or Tag then
type in their PIN then #.
Note: Press * for 2 seconds (beep), read card press 1234#,
New PIN then #, New PIN then #.
30 2 # (Card or PIN) Users can use either their Card, Tag or
PIN number.
34 (1-999 seconds) #
Advertisement
