Information; Sp 12.1 Maintenance Counter; Sp 12.3 Service Counter; Sp 12.4 (Resetting The Service Counter) - Bernina aurora 430 Service Manual

46
SP 12.x

Information

SP 12.1-4 Various service functions
121
1
122
1
123
1
124
1
What to test:
What to adjust:
605
Desired status:
=0?
Repair note:
1200
=0?
The selected stitch program is displayed

SP 12.1 Maintenance counter

SP 12.2 Resetting maintenance counter

SP 12.3 Service counter

SP 12.4 Resetting service counter
Depending on the counter required, press key 12 one to
four times in the basic program.
Press key 18 to confirm selected test.
The counter readings can only be reset in test 12.2
(maintenance reset) and 12.4 (service reset) by pressing
key 18.
Press OK key to exit with a reset.
Each test type is displayed in the matrix (symbol g) until
activated by pressing key 18 (start/stop).
The respective stitch counter value is displayed in the
matrix. symbol g
The respective symbols are displayed with the
corresponding stitch counter values in user mode (see
next page for details).
• None
• This reset must be done after each service!