Sp 7.X Information - Bernina aurora 430 Service Manual

SP 7.x Information
SP 7.1 Version
071
1
SP 7.2 Configuration
072
1
2
What to test:
What to adjust:
1 Desired status:
14
Repair note:
What to test:
What to adjust:
440
Desired status:
Repair note:
SP 7.1 Display of installed version
Press key 7 once in the basic program.
Press key 18 to confirm selected test.
Press OK key to exit and return to basic program.
Each test type is displayed in the matrix (symbol g) until
activated by pressing key 18 (start/stop).
The version is displayed in the matrix. symbol g
• update using BAMS
BERNINA Aurora Maintenance Software
SP 7.2 Display of installed version
Select respective test in the basic program by pressing key
7 twice. Press key 18 to confirm.
Press OK key to exit with saving or ESC key to exit
without saving.
Each test type is displayed in the matrix (symbol g) until
activated by pressing key 18 (start/stop).
The configuration is displayed in the matrix.
symbol g
The configuration values can be reduced (keys 25 + 24)
or increased (keys 25 + 26) by one unit.
• Set the configuration required.
• Press keys 24 and 25 simultaneously to reduce the
value by one unit.
• Press keys 25 and 26 simultaneously to increase the
value by one unit.
aurora 430
aurora 440
aurora 440 JAPAN
35
Number 1
Number 2
Number 3