Advertisement
FH2G – Express Dryer
Installation, Operation and Maintenance Manual
Levelling the Dryer
• The dryer is provided with (4) adjustable feet. These feet can be adjusted using a
standard adjustable wrench. If the foot retaining nut or top nut have loosened, they can
be re-secured using a 15/16" wrench and 15/16" deep socket.
• The cabinet will "twist" during levelling. Confirm the proper alignment of the door in the
frame during levelling. The door should not bind or swing on its own when the cabinet is
properly levelled.
• Door alignment will vary from the pallet to the floor and small adjustments in the feet
will effect the final level of the door.
Understanding the Model Number
The drying cabinet is shipped pre-configured for the expected power supply. Look for the
placard inside the door of the cabinet to determine the configuration of the cabinet.
It is important to correctly match the power supply to cabinet specifications otherwise damage
or injury may result.
Figure: Electrical Placard
3 |
P a g e
Advertisement
