Jetco TTS-1000 Operation Manual page 26

Bench Mount Transducer Drive Adapters
Replaceable female-female drive adapter
The new JETCO line of bench mount torque transducers come with a replaceable female-female
drive adapter. This allows the user to use different drive sizes with each transducer. Each transducer
is supplied with one female-female adapter with the typical square size for that range:
Model Standard Drive/Adapter Size
BM-2000F 1" x 1"
BM-1000F 1" x 1"
BM-600F
3/4" x 3/4"
BM-500F
3/4" x 3/4"
BM-250F ½" x ½"
BM-100F
3/8" x 3/8"
BM-50F
3/8" x 3/8"
BM-250i
1/4" x 3/8"
BM-100i
1/4" x 1/4"
BM-50i
1/4" x 1/4"
The following adapter is available:
Drive
½"x 3/8"
It is acceptable to use a female to male adapter as long as it is as short as possible to avoid
excessive side load i.e., use a 3/4 female to 1" male adapter for use with a 1" x 1" female to
female adapter.
Internal male drive
Part Number
85-0119
Part Number
85-0117
" "
85-0103
" "
85-0098
85-0097
" "
85-0120
85-0110
85-0119