Turn The Camera On; Set The Date And Time - Canon PowerShot SX730 HS Getting Started

6
( 1 )
( 2 )
7
( 2 )
( 1 )
8
9
Check your card's write-protect
switch and insert the memory card.
 
Recording is not possible on memory
cards with a write-protect switch when the
switch is in the locked position. Move the
switch toward (1).
 
Insert the memory card with the label (2)
facing as shown until it clicks into place.
 
To remove the memory card, push it in
until you feel a click, and then slowly
release it.
Close the cover.
 
Lower the cover (1) and hold it down as
you slide the switch, until it clicks into the
closed position (2).
 
If the cover will not close, make sure you
inserted the battery pack facing the right
way in step 2.

Turn the camera on.

 
Press the ON/OFF button.
 
The [Date/Time] screen is displayed.

Set the date and time.

 
Press the [ ][ ] buttons to choose an
option.
 
Press the [ ][ ] buttons or turn the [ ]
dial to specify the date and time.
 
When fi nished, press the [ ] button.
Initial Preparations
5